1.Uncooled infrared bolometer arrays with α-Si and metal films
Liu, Huan1; Wang, Shanshan2; Cai, Changlong1; Zhou, Shun1 Source: Materials Science Forum, v 663-665, p 421-424, 2011, Optoelectronic Materials; ISSN: 02555476; ISBN-10: 0878492119, ISBN-13: 9780878492114; DOI: 10.4028/www.scientific.net/MSF.663-665.421; Conference: 2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010, August 1, 2010 - August 4, 2010; Sponsor: National Science Foundation of China; Trans Tech Publications; Publisher: Trans Tech Publications Ltd
Author affiliation:
1.Shaanxi Province Key Lab. of Thin Films Technology and Optical Test, Xi'an Technological University, Xi'an 710032, China
2.Xi'an Technological University North Institute of Information Engineering, Xi'an 710025, China

2.Study for preparation and photoelectric property of ZnSe crystal
Liu, Cuixia1; Jian, Zengyun1; Zhu, Man1 Source: Advanced Materials Research, v 156-157, p 1101-1104, 2011, Advanced Manufacturing Technology; ISSN: 10226680; ISBN-13: 9780878492053; DOI: 10.4028/www.scientific.net/AMR.156-157.1101; Conference: 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010, November 6, 2010 - November 8, 2010; Sponsor: University of Wollongong (UOW); Northeastern University (NU); University of Science and Technology Beijing (USTB); Hebei Polytechnic University (HPU); Hong Kong Industrial Technology Research Centre (ITRC); Publisher: Trans Tech Publications
Author affiliation:
1.School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an, 710032, China

3.Catalytic properties of Cu-Co catalysts supported on HNO 3-pretreated CNTs for higher-alcohol synthesis                                                                                                                                                                                                                         
Shi, Limin1; Chu, Wei2; Deng, Siyu2 Source: Journal of Natural Gas Chemistry, v 20, n 1, p 48-52, January 2011; ISSN: 10039953; DOI: 10.1016/S1003-9953(10)60145-4; Publisher: Elsevier
Author affiliation:
1.School of Materials and Chemical Engineering, Xi'An Technological University, Xi'an 710032, Shanxi, China
2.School of Chemical Engineering, Sichuan University, Chengdu 610065, Sichuan, China

4.Effect of mischmetal modification treatment on the microstructure, tensile properties, and fracture behavior of Al-7.0%Si-0.3%Mg foundry aluminum alloys
Zhu, Man1, 2; Jian, Zengyun1; Yao, Lijuan3; Liu, Cuixia1; Yang, Gencang2; Zhou, Yaohe2 Source: Journal of Materials Science, v 46, n 8, p 2685-2694, April 2011; ISSN: 00222461, E-ISSN: 15734803; DOI: 10.1007/s10853-010-5135-7; Publisher: Springer Netherlands
Author affiliation:
1.School of Materials and Chemical Engineering, Xi'An Technological University, Xi'an, Shaanxi 710032, China
2.State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, China
3.Foundry Technology, Xi'an, Shaanxi 710005, China

5.Research on application of BRBs in steel frame structures
Chen, Xiangrong1; Zhao, Lin1; Lu, Xiaosong2 Source: Advanced Materials Research, v 163-167, p 730-733, 2011, Advances in Structures; ISSN: 10226680; ISBN-13: 9780878492060; DOI: 10.4028/www.scientific.net/AMR.163-167.730; Conference: 2011 International Conference on Structures and Building Materials, ICSBM 2011, January 7, 2011 - January 9, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an, Shan xi, 710055, China
2.School of Civil Engineering, Xi'an Technological University, Xi'an, Shan xi, 710032, China

6.In situ SiCp/Al-4.5 wt. % Cu composites obtained by direct reaction synthesis
Liang, Yanfeng1, 2; Zhou, Jing'en1; Dong, Shengquan2; Yang, Tong2 Source: Advanced Materials Research, v 150-151, p 868-872, 2011, Advances in Composites; ISSN: 10226680; ISBN-13: 9780878492022; DOI: 10.4028/www.scientific.net/AMR.150-151.868; Conference: 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010, November 6, 2010 - November 8, 2010; Sponsor: University of Wollongong (UOW); Northeastern University (NU); University of Science and Technology Beijing (USTB); Hebei Polytechnic University (HPU); Hong Kong Industrial Technology Research Centre (ITRC); Publisher: Trans Tech Publications
Author affiliation:
1.State Key Laboratory for Mechanical Behavior of Materials, School of Materials Engineering, Xi'an Jiaotong University, Xi'an 710049, China
2.School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an 710032, China

7.FEM study on flange width-thickness ratio of links in eccentrically braced frames
Chen, Xiangrong1; Lu, Xiaosong2; Li, Gang1; Zhou, Jian3 Source: Advanced Materials Research, v 163-167, p 44-48, 2011, Advances in Structures; ISSN: 10226680; ISBN-13: 9780878492060; DOI: 10.4028/www.scientific.net/AMR.163-167.44; Conference: 2011 International Conference on Structures and Building Materials, ICSBM 2011, January 7, 2011 - January 9, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an, Shaan xi, 710055, China
2.School of Civil and Architecture Engineering, Xi'an Technological University, Xi'an, Shaan xi, 710032, China
3.Shaanxi Institute of Architectural Design Company Limited, Xi'an, Shaan xi, 710003, China

8.Design of face gear drive with spur pinion and experimental test
Tong, Jinglin1; Shen, Yunbo2; Wang, Xiaobo1 Source: Applied Mechanics and Materials, v 42, p 408-412, 2011, History of Mechanical Technology and Mechanical Design; ISSN: 16609336; ISBN-13: 9780878492091; DOI: 10.4028/www.scientific.net/AMM.42.408; Conference: 8th China-Japan International Conference on History of Mechanical Technology and Mechanical Design, CJICHMTMD, October 31, 2010 - November 2, 2010; Sponsor: Beihang University; Chinese History of Machinery Society; Japan Society of Education for History of Technology; Chiba Institute of Technology; National Natural Science Foundation of China; Publisher: Trans Tech Publications
Author affiliation:
1.School of Mechanics and Power Engineering, Henan Polytechnic University, Jiao Zuo 454003, China
2.School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710032, China

9.Experimental studies on the superelastic properties of SMA material
Meng, He1; Yang, Kun2; Wang, Sheliang3 Source: Advanced Materials Research, v 163-167, p 2891-2895, 2011, Advances in Structures; ISSN: 10226680; ISBN-13: 9780878492060; DOI: 10.4028/www.scientific.net/AMR.163-167.2891; Conference: 2011 International Conference on Structures and Building Materials, ICSBM 2011, January 7, 2011 - January 9, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.School of Civil and Architecture Engineering, Xi'an Technological University, China
2.School of Civil Engineering, Chang'an University, Xi'an 710061, China
3.College of Civil Engineering, Xi'an University of Architecture and Technology, China

10.Fabrication of pure SiC ceramic foams using SiO2 as a foaming agent via high-temperature recrystallization
Liu, Guangliang1; Dai, Peiyun1; Wang, Yanzhong2; Yang, Jianfeng1; Qiao, Guanjun1 Source: Materials Science and Engineering A, v 528, n 6, p 2418-2422, March 15, 2011; ISSN: 09215093; DOI: 10.1016/j.msea.2010.12.063; Publisher: Elsevier Ltd
Author affiliation:
1.State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xianning Xilu 28, Xi'an 710049, China
2.School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an 710032, China

11.Influence of deposition temperature on tensile behavior and fracture characteristics of SiC Filament by Chemical Vapor Deposition
Liu, Cuixia1; Yang, Yanqing2; Xian, Luo2 Source: Advanced Materials Research, v 146-147, p 1159-1162, 2011, Advances in Superalloys; ISSN: 10226680; ISBN-13: 9780878492008; DOI: 10.4028/www.scientific.net/AMR.146-147.1159; Conference: 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010, November 6, 2010 - November 8, 2010; Sponsor: University of Wollongong (UOW); Northeastern University (NU); University of Science and Technology Beijing (USTB); Hebei Polytechnic University (HPU); Hong Kong Industrial Technology Research Centre (ITRC); Publisher: Trans Tech Publications
Author affiliation:
1.School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an, 710032, China
2.School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, 710072, China

12.Ageing embrittlement of 15Cr1Mo1V steel welded joints evaluated by small punch test
Yao, Yuhong1, 2; Wei, Jianfeng1; Liu, Jiangnan2; Wang, Zhengpin2; Jin, Yaohua2 Source: Advanced Materials Research, v 160-162, p 1223-1227, 2011, Materials Science and Engineering Applications; ISSN: 10226680; ISBN-13: 9780878492169; DOI: 10.4028/www.scientific.net/AMR.160-162.1223; Conference: 2011 International Conference on Materials Science and Engineering Applications, ICMSEA 2011, January 15, 2011 - January 16, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.State Key Laboratory for Mechanical Behavior of Materials, Xi'An Jiaotong University, Xi'an 710049, China
2.School of Materials and Chemical Engineering, Xi'An Technological University, Xi'an 710032, China

13.The effect of heat treatment technology on nonlinear constitutive relationship of metallic rubber
Li, Yuyan1; Huang, Xieqing2 Source: Advanced Materials Research, v 160-162, p 200-203, 2011, Materials Science and Engineering Applications; ISSN: 10226680; ISBN-13: 9780878492169; DOI: 10.4028/www.scientific.net/AMR.160-162.200; Conference: 2011 International Conference on Materials Science and Engineering Applications, ICMSEA 2011, January 15, 2011 - January 16, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.Department of Mechanical and Electrical Engineering, Xi'An Technological University, Xi'an 710032, China
2.Department of Mechanical Engineering, Xi'An Jiaotong University, Xi'an 710049, China

14.Effects of co-substrates and inorganicions on biodegradation of oil-degrading strains
Feng, Jinyang1, 2; Zhou, Xiaode1 Source: Advanced Materials Research, v 179-180, p 781-786, 2011, Materials Science and Engineering; ISSN: 10226680; ISBN-13: 9783037850169; DOI: 10.4028/www.scientific.net/AMR.179-180.781; Conference: 2010 International Conference on Materials Science and Engineering Science, ICMSES 2010, December 11, 2010 - December 12, 2010; Sponsor: International Communication Science Association; Huazhong University of Science and Technology; Publisher: Trans Tech Publications
Author affiliation:
1.Institute of Water Resources and Hydro-Electric Engineering, Xi'an University of Technology, Xi'an, 710048, China
2.College of Material and Chemical Engineering, Xi'an Technological University, Xi'an, 710032, China

15.Dependence of texture evolution on initial orientation in drawn single crystal copper
Chen, J.1, 2; Yan, W.1, 2; Liu, C.X.1; Ding, R.G.3; Fan, X.H.1 Source: Materials Characterization, v 62, n 2, p 237-242, February 2011; ISSN: 10445803; DOI: 10.1016/j.matchar.2010.12.006; Publisher: Elsevier Inc.
Author affiliation:
1.School of Materials Science and Chemical Engineering, Xi'An Technological University, Xi'an 710032, China
2.Department of Applied Physics, Northwestern Polytechnical University, Xi'an 710072, China
3.Department of Metallurgy and Materials, University of Birmingham, Birmingham B15 2TT, United Kingdom

16.Microwave dielectric properties of Li2WO4 ceramic with ultra-low sintering temperature
Zhou, Di1, 2; Randall, Clive A.2; Pang, Li-Xia3; Wang, Hong1; Guo, Jing1; Zhang, Gao-Qun1; Wu, Xin-Guang1; Shui, Li1; Yao, Xi1 Source: Journal of the American Ceramic Society, v 94, n 2, p 348-350, February 2011; ISSN: 00027820, E-ISSN: 15512916; DOI: 10.1111/j.1551-2916.2010.04312.x; Publisher: Blackwell Publishing Inc.
Author affiliation:
1.Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education, Xi'An Jiaotong University, Xi'an 710049, China
2.Center for Dielectric Studies, Materials Research Institute, Pennsylvania State University, University Park, PA 16802, United States
3.Micro-optoelectronic Systems Laboratories, Xi'An Technological University, Xi'an 710032, China

17.Effects of O2 ambient on structural, optical and electrical properties of hafnium oxide thin films prepared by e-beam evaporation
Yang, Chen1; Chen, Zhi-Ming1; Xi, Ying-Xue2; Lin, Tao1 Source: Materials Science Forum, v 663-665, p 413-416, 2011, Optoelectronic Materials; ISSN: 02555476; ISBN-10: 0878492119, ISBN-13: 9780878492114; DOI: 10.4028/www.scientific.net/MSF.663-665.413; Conference: 2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010, August 1, 2010 - August 4, 2010; Sponsor: National Science Foundation of China; Trans Tech Publications; Publisher: Trans Tech Publications Ltd
Author affiliation:
1.Department of Electronic Engineering, Xi'an University of Technology, Xi'an 710048, China
2.School of Optoelectronic Engineering, Xi'an Technological University, Xi'an 710032, China

18.Aging behavior of T91/10CrMo910 dissimilar steel welded joints
Yao, Yuhong1, 2; Wei, Jianfeng1; Liu, Jiangnan2; Wang, Zhengpin2; Jin, Yaohua2 Source: Advanced Materials Research, v 146-147, p 156-159, 2011, Advances in Superalloys; ISSN: 10226680; ISBN-13: 9780878492008; DOI: 10.4028/www.scientific.net/AMR.146-147.156; Conference: 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010, November 6, 2010 - November 8, 2010; Sponsor: University of Wollongong (UOW); Northeastern University (NU); University of Science and Technology Beijing (USTB); Hebei Polytechnic University (HPU); Hong Kong Industrial Technology Research Centre (ITRC); Publisher: Trans Tech Publications
Author affiliation:
1.State Key Laboratory for Mechanical behavior of Materials, Xi'an Jiaotong University, Xi'an, 710049, China
2.School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an, 710032, China

19.Microstructure and properties of magnesium alloy by equal channel angular processing
Guo, Xiaoqin1, 2; Guo, Yongchun3; Zhao, Xin1 Source: Advanced Materials Research, v 146-147, p 814-817, 2011, Advances in Superalloys; ISSN: 10226680; ISBN-13: 9780878492008; DOI: 10.4028/www.scientific.net/AMR.146-147.814; Conference: 2010 International Conference on Advances in Materials and Manufacturing Processes, ICAMMP 2010, November 6, 2010 - November 8, 2010; Sponsor: University of Wollongong (UOW); Northeastern University (NU); University of Science and Technology Beijing (USTB); Hebei Polytechnic University (HPU); Hong Kong Industrial Technology Research Centre (ITRC); Publisher: Trans Tech Publications
Author affiliation:
1.School of Mechatronics Engineering, Zhengzhou Institute of Aeronautical Industry Management, Zhengzhou Henan 450015, China
2.School of Mechanical Science and Engineering, Zhengzhou University, Zhengzhou Henan 450001, China
3.School of Materi and Chemical Industry, Xi'an Technological University, Xi'an 710032, China

20.Finite element analysis of axially loaded confined concrete columns
Meng, He1; Yang, Kun2; Shi, Qingxuan3; Men, Jinjie3 Source: Advanced Materials Research, v 163-167, p 1029-1032, 2011, Advances in Structures; ISSN: 10226680; ISBN-13: 9780878492060; DOI: 10.4028/www.scientific.net/AMR.163-167.1029; Conference: 2011 International Conference on Structures and Building Materials, ICSBM 2011, January 7, 2011 - January 9, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.School of Civil and Architecture Engineering, Xi'an Technological University, Xi'an 710032, China
2.School of Civil Engineering, Chang'an University, Xi'an 710061, China
3.College of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China

21.An improved Simulated Annealing algorithm for real-time dynamic job-shop scheduling
Cao, Yan1; Du, Jiang1 Source: Advanced Materials Research, v 186, p 636-639, 2011, New Trends and Applications of Computer-Aided Material and Engineering; ISSN: 10226680; ISBN-13: 9783037850244; DOI: 10.4028/www.scientific.net/AMR.186.636; Conference: 2011 International Conference on Computer-Aided Material and Engineering, ICCME 2011, March 9, 2011 - March 11, 2011; Sponsor: Zhejiang Economic and Trade Polytechnic; Institute of Electronic and Information Technology; Publisher: Trans Tech Publications
Author affiliation:
1.School of Mechatronic Engineering, Xi'An Technological University, Xi'an, Shaanxi, China

22.Effect of T6 heat treatment on the microstructures and the aging behavior of the grain-refined A356 alloys
Zhu, Man1, 2; Yang, Gencang2; Yao, Lijuan3; Zhou, Yaohe2 Source: Advanced Materials Research, v 143-144, p 1410-1414, 2011, Smart Materials and Intelligent Systems; ISSN: 10226680; ISBN-13: 9780878492237; DOI: 10.4028/www.scientific.net/AMR.143-144.1410; Conference: International Conference on Smart Materials and Intelligent Systems 2010, SMIS 2010, December 17, 2010 - December 20, 2010; Sponsor: Shanghai Jiao Tong University; Nanyang Normal University; Hebei Polytechnic University; Henan Institute of Science and Technology; Chongqing University of Arts and Sciences; Hunan Institute of Engineering; Publisher: Trans Tech Publications
Author affiliation:
1.School of Materials and Chemical Engineering, Xi'an Technological University, Xi'an, Shaanxi 710032, China
2.State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, Shaanxi 710072, China
3.Foundry Technology, Xi'an Shaanxi 710005, China

23.Thin metal films and multi-layers structure as absorbers for infrared detectors
Liu, Huan1; Song, Liang2; Zhou, Shun1; Cai, Changlong1 Source: Materials Science Forum, v 663-665, p 352-355, 2011, Optoelectronic Materials; ISSN: 02555476; ISBN-10: 0878492119, ISBN-13: 9780878492114; DOI: 10.4028/www.scientific.net/MSF.663-665.352; Conference: 2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010, August 1, 2010 - August 4, 2010; Sponsor: National Science Foundation of China; Trans Tech Publications; Publisher: Trans Tech Publications Ltd
Author affiliation:
1.Micro-optoelectrical System Laboratory, Xi'an Technological University, Xi'an 710032, China
2.Xi'an Institute of Electromechanical Information Technology, Xi'an 710065, China

24.Finite element analysis of creep and thermal stress for shape memory alloy joint
Zhou, Xuefeng1; Zhi, Youhai2; Gou, Bingwang3 Source: Key Engineering Materials, v 452-453, p 537-540, 2011, Advances in Fracture and Damage Mechanics IX, FDM 2010; ISSN: 10139826; ISBN-13: 9780878492411; DOI: 10.4028/www.scientific.net/KEM.452-453.537; Conference: 9th International Conference on Fracture and Damage Mechanics, FDM 2010, September 20, 2009 - September 22, 2009; Publisher: Trans Tech Publications Ltd
Author affiliation:
1.School of Civil and Architecture Engineering, Xi'an Technological University, Xi'an, 710032, China
2.School of Civil Engineering, Xuzhou Institute of Technology, Xuzhou, 221008, China
3.Department of Engineering Mechanics, Northwestern Polytechnical University, Xi'an, 710072, China

25.Axial compression ratio limits of HSC columns confined with high-strength stirrups
Yang, Kun1; Shi, Qingxuan2; Meng, He3; Men, Jinjie2 Source: Advanced Materials Research, v 163-167, p 1024-1028, 2011, Advances in Structures; ISSN: 10226680; ISBN-13: 9780878492060; DOI: 10.4028/www.scientific.net/AMR.163-167.1024; Conference: 2011 International Conference on Structures and Building Materials, ICSBM 2011, January 7, 2011 - January 9, 2011; Publisher: Trans Tech Publications
Author affiliation:
1.School of Civil Engineering, Chang'an University, Xi'an 710061, China
2.College of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China
3.School of Civil and Architecture Engineering, Xi'an Technological University, Xi'an 710032, China

26.Dependence of morphologies for SnO2 nanostructures on their sensing property
Lingmin, Yu1; Xinhui, Fan1; Lijun, Qi1; Lihe, Ma1; Wen, Yan1 Source: Applied Surface Science, v 257, n 7, p 3140-3144, 2011; ISSN: 01694332; DOI: 10.1016/j.apsusc.2010.11.013; Publisher: Elsevier
Author affiliation:
1.School of Material and Engineering, Xi'An Technological University, Xi'an Jin Hua Road No. 4, China

27.Texture evolution and its simulation of cold drawing copper wires produced by continuous casting
Chen, Jian1, 2; Yan, Wen1, 2; Li, Wei3; Miao, Jian4; Fan, Xin-Hui2 Source: Transactions of Nonferrous Metals Society of China (English Edition), v 21, n 1, p 152-158, January 2011; ISSN: 10036326; DOI: 10.1016/S1003-6326(11)60692-4; Publisher: Nonferrous Metals Society of China
Author affiliation:
1.Department of Applied Physics, Northwestern Polytechnical University, Xi'an 710072, China
2.School of Materials Science and Chemical Engineering, Xi'An Technological University, Xi'an 710032, China
3.Baoji Titanium Industry Co., Ltd., Baoji 721014, China
4.School of Materials Science and Engineering, Xi'An Jiaotong University, Xi'an 710049, China

28.Anovel method for the fabrication of infrared focal plane arrays based on the amorphous silicon
Liu, Huan1; Liu, Weiguo1; Cai, Changlong1; Zhou, Shun1 Source: Materials Science Forum, v 663-665, p 1183-1186, 2011, Optoelectronic Materials; ISSN: 02555476; ISBN-10: 0878492119, ISBN-13: 9780878492114; DOI: 10.4028/www.scientific.net/MSF.663-665.1183; Conference: 2010 International Conference on Optical, Electronic and Electrical Materials, OEEM2010, August 1, 2010 - August 4, 2010; Sponsor: National Science Foundation of China; Trans Tech Publications; Publisher: Trans Tech Publications Ltd
Author affiliation:
1.Shaanxi Province Key Lab of Thin Films Technology and Optical Test, Xi'An Technological University, Xi'an 710032, China

29.Manufacturing feature modeling system framework based on XML and UG platform
Cao, Yan1; Du, Jiang1 Source: Advanced Materials Research, v 186, p 393-397, 2011, New Trends and Applications of Computer-Aided Material and Engineering; ISSN: 10226680; ISBN-13: 9783037850244; DOI: 10.4028/www.scientific.net/AMR.186.393; Conference: 2011 International Conference on Computer-Aided Material and Engineering, ICCME 2011, March 9, 2011 - March 11, 2011; Sponsor: Zhejiang Economic and Trade Polytechnic; Institute of Electronic and Information Technology; Publisher: Trans Tech Publications
Author affiliation:
1.School of Mechatronic Engineering, Xi'an Technological University, Xi'an, Shaanxi, China

30.Ferroelastic phase transition compositional dependence for solid-solution [(Li0.5Bi0.5)xBi1- x][MoxV1-x]O4 scheelite-structured microwave dielectric ceramics
Zhou, D.1, 2; Qu, W.G.2; Randall, C.A.2; Pang, L.X.3; Wang, H.1; Wu, X.G.1; Guo, J.1; Zhang, G.Q.1; Shui, L.1; Wang, Q.P.1, 4; Liu, H.C.4; Yao, X.1 Source: Acta Materialia, v 59, n 4, p 1502-1509, February 2011; ISSN: 13596454; DOI: 10.1016/j.actamat.2010.11.014; Publisher: Elsevier Ltd
Author affiliation:
1.Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education, Xi'An Jiaotong University, Xi'an 710049, Shaanxi, China
2.Center for Dielectric Studies, Materials Research Institute, Pennsylvania State University, University Park, PA 16802, United States
3.Micro-optoelectronic Systems Laboratories, Xi'An Technological University, Xi'an 710032, Shaanxi, China
4.School of Science, Xi'An Polytechnic University, Xi'an 710048, China